Powdered One Shot Urea Formaldehyde Resin Wood Adhesive
Fastform is a powder adhesive based upon urea formaldehyde resin. Fastform is supplied in both bulk quantities and in unique single shot sachet to minimize wastage.
AREAS OF USE
Simple mixing with water
High Water Resistance
Interior of Exterior Use
Easy to Mix
Stronger Bond Than The Wood Itself
Mixing can be done by either weight or volume. Mixing by weight will give the most accurate and consistent glue mixes. If mixing by weight, mix 2 parts of Fastform to 1 part of cold water.
If mixing by volume then 3.5 measures of Fastform are required to 1 measure of cold water.
For both methods mix as follows:
1) Put half the cold water into a non metallic mixing vessel.
2) Add all the Fastform powder and stir until dissolved.
3) Add all the remaining and stir until the mixture is smooth.
The mix is then ready to use. The mixed material will remain usable for approx. 3 hours at 15°C
Use a stiff brush to apply the mixed adhesive to one surface only.
Assemble and clamp (Pin or Screw) the joint whilst the glue is wet.
Keep the joint under pressure until set (approx. 6 hours @ 15° C)
A damp cloth can be used to remove excess wet adhesive.
Cleaning of tools:
Tools and equipment may be cleaned using clean cold water before the adhesive has hardened.
100-250 grams/sq. metre
BS EN 204 Durability Class D3
BS EN 302-1 A3 Type 11
White Coloured Powder
VISCOSITY OF STANDARD MIX
50P (Brookfield RVF, Spindle 3, 10rpm)
1 year under cool conditions
HEALTH & SAFETY
Protect skin from contact with both unmixed powder and mixed adhesive. Mix in well ventilated area.